Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) APA 80ton ~200ton Parameters
Item |
XPA-80 |
XPA-110 |
XPA-160 |
XPA-200 |
Model |
V |
H |
V |
H |
V |
H |
V |
H |
Capacity |
Ton |
80 |
110 |
160 |
200 |
Rated tonnage point |
mm |
4 |
2 |
6 |
3 |
6 |
3 |
6 |
3 |
Speed changing |
s.p.m |
35-80 |
80-120 |
30-60 |
60-90 |
20-50 |
40-70 |
20-50 |
50-70 |
Stable speed |
s.p.m |
65 |
50 |
35 |
35 |
Stroke |
mm |
150 |
70 |
180 |
80 |
200 |
90 |
200 |
100 |
Die height |
mm |
340 |
380 |
360 |
410 |
400 |
450 |
460 |
510 |
Slide adjustment |
mm |
80 |
80 |
100 |
110 |
Slide area |
mm |
560x420x70 |
650x470x80 |
700x550x90 |
850x550x90 |
Bolster area |
mm |
1000x550x90 |
1150x600x110 |
1250x800x140 |
1350x820x140 |
Shank hole |
mm |
Φ50 |
Φ50 |
Φ65 |
Φ65 |
Main motor |
kw.p |
7.5x4 |
11x4 |
15x4 |
18x4 |
Slide adjust device |
HP |
Electrial driving |
Air pressure |
kg/cm2 |
6 |
6 |
6 |
6 |
Presses precision |
|
GB(JIS)1 class |
GB(JIS)1 class |
GB(JIS)1 class |
GB(JIS)1 class |
Presses dimension |
mm |
1800x1180x2980 |
1900x1300x3200 |
2420x1390x3465 |
2420x1490x3612 |
Presses weight |
Tons |
6.5 |
9.6 |
14 |
16 |
Die cushion Optional |
Capacity |
Ton |
3.6 |
6.3 |
10 |
10 |
Stroke |
mm |
70 |
80 |
80 |
80 |
Die cushion effective area |
mm2 |
450x310 |
500x350 |
650x420 |
650x420 |
2) Servo Feeder:
Model |
Stock widthl(mm) |
Stock Thickness(mm) |
Stock Thickness × Stock widthl(mm) |
Pass Line (mm) |
Releasing Performance
(SPM) |
Motor (kw) |
RNC-100 |
20-100 |
0.1-3.2 |
3.0 × 100/3.2×80 |
70-170 |
~200 |
AC 0.4 |
RNC-200 |
20-200 |
0.1-3.2 |
2.3×200/3.2×80 |
70-170 |
~200 |
AC 0.4 |
RNC-300 |
20-300 |
0.1-3.2 |
2.0×300/3.2×80 |
70-170 |
~200 |
AC 0.75 |
RNC-200HA |
20-200 |
0.3-3.2 |
2.3×200/3.2×80 |
70-170 |
~80 |
AC 0.4 |
RNC-300HA |
20-300 |
0.3-3.2 |
2.0×300/3.2×80 |
70-170 |
~80 |
AC 0.75 |
RNC-400HA |
20-400 |
0.3-3.2 |
1.6×400/3.2×50 |
70-170 |
~80 |
AC 0.75 |
RNC-600HA |
20-600 |
0.3-3.2 |
1.2×600/3.2×50 |
70-170 |
~60 |
AC 1.3 |
RNC-800HA |
20-800 |
0.3-3.2 |
1.0×800/3.2×50 |
70-170 |
~60 |
AC 2.9 |
RNC-200F |
20-200 |
0.2-3.2 |
2.3×200/3.2× 100 |
70-170 |
~200 |
AC 0.4 |
RNC-300F |
20-300 |
0.2-3.2 |
2.3×300/3.2×80 |
70-170 |
~200 |
AC 0.4 |
RNC-400F |
20-400 |
0.2-3.2 |
1.6×400/3.2×60 |
70-170 |
~150 |
AC 0.75 |
3) Uncoiler with Straightener:
Model |
RGL-200 |
RGL-300 |
RGL-400 |
RGL-500 |
RGL-600 |
Width of Material (mm) |
200 |
300 |
400 |
500 |
600 |
Thickness of Material (mm) |
0.3-3.2 |
Line Speed (m/min) |
16 |
Straightener Roll (Qty) |
Top3 /Bottom4
(4 Bottom Rolls have Drive Function) |
Pinch Roll (Inlet/Outlet) (Qty) |
lnlet:2/Outlet:2 |
Max. Meterial Weight (kg) |
1000 |
1000 |
1500 |
2000 |
2000 |
Extent Expansion(mm) |
460 ~ 520 |
Coil O.D. (Mm) |
1200 |
1200 |
1200 |
1200 |
1200 |
Mandrel Expansion |
Manual |
Power Supply |
3Phase 220V/380V/50HZ |
Product Features :
* With high rigidity rack design, they are welded with the use of high- quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Consistent driving center and machine center to guarantee accurate and stable punching.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard configuration :
* Inverter
* Hydraulic over-load protector
* Slide adjuster (60Tons and below)
* Slide adjust device (80Tons and above)
* Die height indicator (60Tons and below)
* Die height indicator (60Tons and above)
* Balance device
* Rotary cam switch
* Misfeed detection consent
* Power supply
* Crank angle indicator
* Electrical stroke counter
* Air source connector
* Against over-run safety device
* Air ejector
* Maintenance tool box
* Operation manual
Optional Configuration :
* High performance wet clutch & brake
* Electrical automatic lubrication system
* Pneumatic die cushion device
* Foot switch
* Quick die change device (die lifter, clamp and die arm sepjes)
* Slide knock-out device
* Anti-vibration press mount
* Photo-electronic safety device
* Feeder
* Uncoiler
* Leveler
* Mechanism hand
* Die room light
* Touch pad (preset total counter)
* PAC 100 counter system
* Human-computer control system